[Prev][Next][Index][Thread]
Re: inductive heaters
Al,
the coils are not kept in the oven while heating the unit. A while back I
think I made some comment about designing your oven so that you can get to
the electrodes easily / quickly to heat them after the glass is up to temp.
On single electrode pcs. I try to position the electrode as close to a small
'port' as possible. The leads from 'the box' to the coil on my unit are
about 18" long; I have tied the coil (using Transbestos) to a stick of glass
to stick it in the oven to reach the far electrode.
Morgan