The Neon Bender's BBS!
The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please
contact us.
[Please Read]
|
Re: BURNT UP ELECTRODES
Posted By: SVP Neon Equipment In Response To: Re: BURNT UP ELECTRODES (am/pm)
Date: Thursday, 7 February 2008, at 1:00 p.m.
> We use EGL T19 CL 200ma Electrodes on 20mm
> border lamps and although we don’t have any
> problems processing these I would be
> interested to know what you added to your
> process to pump EGL Electrodes
> Had a look at SVP they only do 50ma but will
> give these a tryOur 15C-L80 is an 80 mA electrode. Our 15C-M45 is an 45 mA electrode, so we don't specifically have a 50 mA.
The metal shell of our 15C-M45 is actual a little longer than EGL's equivalent 15CM, so the M45 will handle a little more current.
We do not offer anything rated higher than the 80 mA at this time, but may if demand increases.
Mark
|
Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.
This page Copyright © 1996-2005 Krypton Neon