[Prev][Next][Index][Thread]
Re: Hot Glass Q's
Hey JD,
I guess that Yo Jacob caught my eye.
With out seeing what you are doing I sounds like you need lots more air.
This problem is also compounded with the use of propane. Your propane to
air ratio should be about 25:1 as compared to Natural gas at 10:1.
Your air pressure sounds a bit low, however more important is volume.
Miller suggests 150 cubic feet per hour for the xfire and about 1200 cf/h
for the ribbon. Your volume may be decreased by to small of an air line
or to small of a mixer. Look for restrictions in the air line.
Well I hope this helps.
JAF
References: