The Neon Bender's BBS!

The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please contact us.

[Please Read]

Re: calibrating procedure

Posted By: Don Miner
Date: Friday, 9 June 2006, at 10:55 a.m.

In Response To: Re: calibrating procedure (gavin)

> Digital map wheels can give some crazy
> results sometimes. The numbers carry on
> racing after youve finished mapping because
> your hand will go faster than the wheel can
> calibrate, for this reason i find i can
> never quite trust them. Analogue on the
> other hand moves as your hand does - very
> satisfying procedure. But as stated before -
> its only a guideline, always check your load
> in circuit with at least a mA guage. All very good suggestions, but one thing to remember is the actual transformer may not be up to the task. I recently learned this the hard way. France E-Neon transformers will only carry 80% of stated footage capacity. Just my two pennies worth. Thanks for reading.

Messages In This Thread

• calibrating procedure -- sparky -- Thursday, 8 June 2006, at 5:49 p.m.
  • Re: calibrating procedure -- Sean S -- Thursday, 8 June 2006, at 6:51 p.m.
  • Re: calibrating procedure -- SVP Neon Equipment -- Thursday, 8 June 2006, at 8:06 p.m.
    • Re: calibrating procedure -- Joe Sniezek -- Tuesday, 29 August 2006, at 6:12 p.m.
      • Re: calibrating procedure -- Sean S -- Tuesday, 29 August 2006, at 7:03 p.m.
        • Re: calibrating procedure -- SVP Neon Equipment -- Wednesday, 30 August 2006, at 12:15 p.m.
          • Re: calibrating procedure -- Sean S -- Wednesday, 30 August 2006, at 3:02 p.m.
  • Re: calibrating procedure -- Dana -- Friday, 9 June 2006, at 12:50 a.m.
    • Re: calibrating procedure -- Travis* -- Friday, 9 June 2006, at 3:17 a.m.
      • Re: calibrating procedure -- gavin -- Friday, 9 June 2006, at 9:12 a.m.
        • Re: calibrating procedure -- Don Miner -- Friday, 9 June 2006, at 10:55 a.m.
          • Re: calibrating procedure -- sparky -- Friday, 9 June 2006, at 2:10 p.m.
            • Re: calibrating procedure -- Chris S. -- Friday, 9 June 2006, at 11:06 p.m.
              • Re: calibrating procedure -- Travis* -- Saturday, 10 June 2006, at 3:57 a.m.

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.