The Neon Bender's BBS!
The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please
contact us.
[Please Read]
|
Re: Shop Benches, Bombarder and other.
Posted By: George Vidas In Response To: Re: Shop Benches, Bombarder and other. (George Vidas)
Date: Sunday, 22 March 2015, at 6:04 p.m.
> The gist that I recall is: start with the
> heater low and the backing pump on; let the
> oil and heater get up to temperature (an
> hour or so); and then gradually turn up the
> heater (half a notch per half hour, lets
> say) until the top ring is just barely warm,
> or, as Sean said, there is no visible vapor
> activity.And then, once you're settled on the temperature, leave the dial set and just unplug the heater. Check that the heater is as high as possible without overheating seasonally.
|
Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.
This page Copyright © 1996-2005 Krypton Neon