The Neon Bender's BBS!

The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please contact us.

[Please Read]

Re: There's a better product that's DIY repairable

Posted By: sean s
Date: Monday, 21 April 2014, at 5:12 p.m.

In Response To: Re: There's a better product that's DIY repairable (Sign Shack)

Thanks for the suggestions everyone.

IR gauge, the only thing you will have to do is that your finishing temp is going to be 310C not the 250C like the clamp on gauges.

Some will say that IR is not accurate but on clear if you put a black dot on point of contact it will read properly

Messages In This Thread

• did my temp gauge fry? -- Sign Shack -- Monday, 14 April 2014, at 1:52 a.m.
  • Re: did my temp gauge fry? -- neontek -- Monday, 14 April 2014, at 5:03 p.m.
  • Re: did my temp gauge fry? -- Chris S. -- Monday, 14 April 2014, at 5:16 p.m.
  • There's a better product that's DIY repairable *NM* -- SVP Neon Equipment -- Thursday, 17 April 2014, at 12:33 a.m.
    • Re: There's a better product that's DIY repairable -- Sign Shack -- Thursday, 17 April 2014, at 1:33 a.m.
      • Knowledge -- SVP Neon Equipment -- Thursday, 17 April 2014, at 5:35 p.m.
      • Re: There's a better product that's DIY repairable -- sean s -- Monday, 21 April 2014, at 5:12 p.m.
        • Wrong. All clamp-on gauges don't say 250C. Read. *NM* -- SVP Neon Equipment -- Tuesday, 22 April 2014, at 12:17 a.m.
        • Re: There's a better product that's DIY repairable -- John Anderson -- Tuesday, 29 April 2014, at 4:18 p.m.
          • Re: There's a better product that's DIY repairable -- SVP Neon Equipment -- Wednesday, 30 April 2014, at 12:27 a.m.
            • Re: There's a better product that's DIY repairable -- John Anderson -- Wednesday, 30 April 2014, at 5:40 p.m.
              • Re: There's a better product that's DIY repairable -- SVP Neon Equipment -- Wednesday, 30 April 2014, at 6:52 p.m.
                • Re: There's a better product that's DIY repairable -- John Anderson -- Wednesday, 30 April 2014, at 9:17 p.m.
                  • Re: There's a better product that's DIY repairable -- SVP Neon Equipment -- Thursday, 1 May 2014, at 12:11 a.m.

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.