The Neon Bender's BBS!
The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please
contact us.
[Please Read]
|
Re: Beer signs arcing???
Posted By: Neon Creations In Response To: Re: Beer signs arcing??? (Chris.oh)
Date: Monday, 27 January 2014, at 11:59 p.m.
> If this is a repaired (patched) tube, the
> block-out paint may change from an
> insulating coating to a conductor. If had a
> couple of tubes that seem perfectly fine
> give a decent little zap if you touch the
> 'burnt' block-out.> I generally try to make sure there is ample
> space between units, paint some fresh
> block-out on any tight spots for good
> measure, and give a good listen for buzzing.
> I haven't had any pinhole issues... yet...
> knock on wood.> Hope this helps
Actually, no. I know what you're talking about but this is different. While I was repairing the broken tube, I had that pc jumped out and the rest of the sign on. Two double backs arced. No buzzing, not on blockout, but they were close or touching.
|
Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.
This page Copyright © 1996-2005 Krypton Neon