The Neon Bender's BBS!

The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please contact us.

[Please Read]

Re: Lead Free tubing cutting files

Posted By: H.Erickson
Date: Saturday, 15 June 2013, at 4:10 a.m.

In Response To: Lead Free tubing cutting files (Jeff Soper)

> Just wanted to get some feedback on what
> other tube benders are using for cutting the
> lead free tubing. Bending, welding, it's no
> problem, but my files are going dull too
> fast. Is there a better file out there?

Electric cutter , KITCO , stainless steel wire.

I never thought much of the device the first 15 yrs of bending,,, until I found out the tricks to using one correctly. I have three cutter handles hooked up to one box. I have used it for years with with the leaded glass and was great for morretti glass. When the lead free switch occurred it was seamless. Very rarely use a file

Messages In This Thread

• Lead Free tubing cutting files -- Jeff Soper -- Saturday, 15 June 2013, at 3:38 a.m.
  • Re: Lead Free tubing cutting files -- H.Erickson -- Saturday, 15 June 2013, at 4:10 a.m.
    • Re: Lead Free tubing cutting files -- neontek -- Monday, 17 June 2013, at 12:34 p.m.
  • Re: Lead Free tubing cutting files -- SVP Neon Equipment -- Saturday, 15 June 2013, at 1:21 p.m.
    • Re: Lead Free tubing cutting files *NM* -- shocking -- Sunday, 16 June 2013, at 1:38 a.m.
      • Re: Lead Free tubing cutting files -- shocking -- Sunday, 16 June 2013, at 1:46 a.m.
        • Re: Lead Free tubing cutting files -- SVP Neon Equipment -- Sunday, 16 June 2013, at 1:23 p.m.
  • Re: Lead Free tubing cutting files -- Phantom Neon -- Sunday, 16 June 2013, at 11:24 p.m.
  • Re: Lead Free tubing cutting files -- Jeff Soper -- Monday, 17 June 2013, at 2:45 a.m.

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.