The Neon Bender's BBS!
The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please
contact us.
[Please Read]
|
Re: Gas Transfer System
Posted By: SVP Neon Equipment In Response To: Re: Gas Transfer System (caliph23)
Date: Sunday, 19 May 2013, at 12:07 p.m.
> Hi Mark.
> Swagelok makes a Teflon lined hose with
> stainless overbraid and stainless fitings
> rated for much higher pressure than I need.
> Would you still not recommend because of the
> outgassing? Its flexible and would reduce
> the number of fittings needed.> How's the move coming along?
> Thanks,
> RafeI assume you're having problems with something leaking? You didn't mention the stainless over-braid in your original post. It will work, but I would choose the Teflon over the Viton for this purpose. With that said, once everything is installed and there are no leaks, I would let it pump down for at least 24 hours and heating the line with a heat gun a few times to help release moisture in the Teflon.
Swagelok also has flexible stainless lines that will mate up to their connectors. They're probably a little more expensive, but that would be my choice.
Should be ready to start taking orders for consumables on Wednesday.
|
Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.
This page Copyright © 1996-2005 Krypton Neon