The Neon Bender's BBS!

The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please contact us.

[Please Read]

Re: Solid state transformers...

Posted By: tomz.
Date: Monday, 26 September 2011, at 7:49 p.m.

In Response To: Re: Solid state transformers... (Chris S.)

Thanks for all the responses, good to get a little discussion going!
We are looking at:

Ventex
TFT
Allinson
CPI
Tech22
and from off the board I got
Evertron (Everbrite)

This is a pretty nice selection anyways!
Gonna give the CPI and Evertron a shot. Also interesting fact about mounting the Ventex flush as it is a heat sink, is this true for the indoor models or just the outdoor (they have a metal base).

Thanks again!

Messages In This Thread

• Solid state transformers... -- tomz. -- Tuesday, 20 September 2011, at 9:42 p.m.
  • Re: Solid state transformers... -- SVP Neon Equipment -- Thursday, 22 September 2011, at 11:16 a.m.
    • Re: Solid state transformers... -- tomz. -- Thursday, 22 September 2011, at 2:01 p.m.
      • Re: Solid state transformers... -- Juor -- Friday, 23 September 2011, at 12:24 a.m.
        • Re: Solid state transformers... -- neontek -- Friday, 23 September 2011, at 3:48 a.m.
      • Re: Solid state transformers... -- John Anderson -- Friday, 23 September 2011, at 5:32 p.m.
        • Re: Solid state transformers... -- Chris S. -- Saturday, 24 September 2011, at 5:26 p.m.
          • Re: Solid state transformers... -- tomz. -- Monday, 26 September 2011, at 7:49 p.m.
            • Re: Solid state transformers... -- tomz. -- Monday, 26 September 2011, at 7:51 p.m.
  • Re: Solid state transformers... -- John Dragun -- Friday, 25 November 2011, at 3:10 p.m.
    • Re: Solid state transformers... -- tomz. -- Monday, 28 November 2011, at 2:58 p.m.

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.