The Neon Bender's BBS!
The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please
contact us.
[Please Read]
|
Re: Transco 0-40 Torr gauge
Posted By: neontek In Response To: Re: Transco 0-40 Torr gauge (GB)
Date: Friday, 2 October 2009, at 2:56 a.m.
> Ummmmm the last time I looked Actown was
> alive and well since we still order core and
> coil transformers from them...... They still
> have a website.> As for the bezel, take a good look at it. It
> is not an EGL model. The Transco and Daco
> dial gauge is not like the EGL dial gauge.
> The face and meter movement are not
> "pressed on" as you indicate. The
> bezel unscrews so everything can easily be
> removed for service and calibration. It is
> very easy to examine the O-ring, glass
> window and housing mating surface to make
> sure they are in good shape. If the O-ring
> is not damaged there is no need to replace
> it. It is not necessary to "leak
> check" the instrument any more than it
> is necessary to leak check threaded O-ring
> compression fittings that are part of most
> Pyrex manifolds including EGL's. Close
> visual inspection and attention to detail
> are all that is required. Take a good look
> at the gauge and you will see the
> differences.> Come on now, let's play nice in the sandbox.
*** I just received 3 ACTOWN transformers.
|
Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.
This page Copyright © 1996-2005 Krypton Neon