The Neon Bender's BBS!

The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please contact us.

[Please Read]

Re: Metal manifold

Posted By: neontek
Date: Sunday, 15 February 2009, at 5:30 p.m.

In Response To: Re: Metal manifold (SVP Neon Equipment)

> Thanks. I Googled it last night and found
> that Kurt J. Lesker also offers them, though
> they are probably more expensive than
> Duniway (didn't find Duniway in the search).

> Eurovac offers them in borosilicate and
> soda. TecnoLux used to carry them (don't
> know if they still do). Eurocom also has
> them, though they charge more for the same
> thing.

> Yes, they can be made on a lathe if you have
> the tooling. I use a carriage fire with a
> foot pedal, not a crossfire.

> Too much to say here.

Mark,

I found "Duniway", but couldn't find "Eurovac".
Do you have a website adress for them?

I've dealt with Kurt J. Lesker in the past and have had good luck.

Thanks,
Tony D.

Messages In This Thread

• Metal manifold -- Jan -- Thursday, 12 February 2009, at 8:21 p.m.
  • Re: Metal manifold -- Don Miner -- Friday, 13 February 2009, at 12:55 p.m.
    • Re: Metal manifold -- SVP Neon Equipment -- Friday, 13 February 2009, at 2:58 p.m.
      • Re: Metal manifold -- Jan -- Friday, 13 February 2009, at 10:43 p.m.
        • Re: Metal manifold -- SVP Neon Equipment -- Saturday, 14 February 2009, at 1:30 a.m.
          • Re: Metal manifold -- Jan -- Saturday, 14 February 2009, at 5:48 a.m.
            • Re: Metal manifold -- SVP Neon Equipment -- Saturday, 14 February 2009, at 3:22 p.m.
              • Re: Metal manifold -- neontek -- Sunday, 15 February 2009, at 5:30 p.m.
                • Re: Metal manifold -- SVP Neon Equipment -- Monday, 16 February 2009, at 2:18 p.m.
                • Website -- SVP Neon Equipment -- Monday, 16 February 2009, at 2:29 p.m.
  • Re: Metal manifold -- dana -- Saturday, 14 February 2009, at 2:00 a.m.

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.