The Neon Bender's BBS!

[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

Re: need information on pumping

Posted By: SVP Neon Equipment
Date: Wednesday, 21 January 2009, at 8:25 p.m.

In Response To: need information on pumping (SAL16)


> working for a new company,glassbending i
> have worked on eurocom systems,pumping
> before.new company has old school system
> greased cockstops ect.my question is there
> is no gauge for the amount of gas to put in
> the unit they have the oil gauges.can any
> body tell me the procedure of pumping units
> with this type of system step by
> step.thankyou very much you are a great
> knowledgable group of true benders thankx
> again sal16

A U-gauge oil manometer *is* the original gas fill pressure gauge. It can easily be used to monitor bombarding pressures as well as fill pressures and is far more accurate than the digital and dial gauges commonly used, provided the appropriate scale and fluid are used.

Here is a step-by-step processing procedure using a U-gauge oil manometer.

http://www.svpneon.com/SVP_Bombarding_Procedure.html

You may also like to browse the technical page on our website for other useful info.

http://www.svpneon.com/technical.html

Mark


SVP Neon Equipment

Messages In This Thread

[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.

This page Copyright © 1996-2005 Krypton Neon