The Neon Bender's BBS!
The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please
contact us.
[Please Read]
|
Re: 25mm Glass
Posted By: John Anderson In Response To: 25mm Glass (sivart)
Date: Friday, 28 March 2008, at 10:32 p.m.
> I have a potential project that is calling
> for 25mm white and orange glass.Certainly they are refering to the glass in the "lit" phase? Especially if it in an application where the tube is not viewed directly (ex: cove lighting, reverse channel, etc.) 25mm green is available from Tecnolux. I've used it.
I would question their reason for specifying 25mm glass. The advantages of such fit within a VERY narrow paradigm. It is useful in residential applications where (as per NEC) voltages must remain under 1000v. It is also useful above 150ma - (which is rare in cold-cathode apps). (The few 250-400ma tubes I've seen in the field look "rode hard and put away wet" after a few thousand hours.) Expensive porcelain housings a MUST at those currents.
In almost all cases, it's less expensive to run 2 rows of 60ma neon than any MA of 25mm.
|
Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.
This page Copyright © 1996-2005 Krypton Neon