The Neon Bender's BBS!

[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

Re: Which blower?

Posted By: Sean S
Date: Wednesday, 5 March 2008, at 8:41 a.m.

In Response To: Re: Which blower? (SVP Neon Equipment)


The manufacturer will be able to give you a decible level.
You can quiet the blower down by running your intake from outside and exhaust (if you use a pressure relief valve). Smaller blowers will slow themselves down when there is back pressure. Anything larger than a 92CFM will require a pressure relief valve.
You can also build a U shaped cover for the blower with plywood and ceiling tiles. Leave the front and back open to allow air to flow. Regens emitt the noise from the sides and top of the motor.

> I don't know what the decibel level is (and
> I doubt the seller will be able to tell
> you), but from an observation standpoint the
> noise level is comparable to other regen
> blowers of similar size: Some are a little
> noisier than others, some a little less. To
> me it is sort of a low noise level high
> pitched whistle. Some find it annoying,
> others don't. From my experience with that
> particular blower, the biggest problem you
> will have is getting one that works.
> Meaning, be prepared to either return it for
> an exchange (possibly as many as 2 or 3
> times), or pay a motor shop to work on it.

> Understood. In that respect the "cool
> factor" can certainly add to the
> enjoyment of experimentation.

> Mark


Messages In This Thread

[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.

This page Copyright © 1996-2005 Krypton Neon