The Neon Bender's BBS!

The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please contact us.

[Please Read]

Re: Glass bending jigs

Posted By: SVP Neon Equipment
Date: Wednesday, 2 January 2008, at 12:51 p.m.

In Response To: Re: Glass bending jigs (sivart)

Marinite is made by Johns Manville - 800-654-3103. They can tell you who the nearest distributor is.

Marinite is available in several different thickness' as well as different compositions, which will have an affect on the price.

You may also want to consider hardy board / handy board, available from Lowe's, Home Depot and I'm sure others. You will find it in the bathroom remodeling section. It is available in 1/4", 1/2" and 3/4" thickness. It is a lot less expensive than Marinite and from what I can tell just as heat resistant.

Mark

> Sean do you know what brand their non
> asbestos is? Or even the web address for
> capitol electric?

> I looked into maronite a few years ago and
> did find it to be more expensive than the
> fire resistant drywall but it didnt seem
> that it was that bad. I want to think I had
> received decent prices from on of my local
> lumber suppliers. That may be a good way to
> go if you have a relationship with your
> local lumber store. Preferably a true local
> supplier and not a Lowes or Menards.

Messages In This Thread

• Glass bending jigs -- jc -- Thursday, 20 December 2007, at 5:08 a.m.
  • Re: Glass bending jigs -- Sean S -- Thursday, 20 December 2007, at 12:46 p.m.
    • Re: Glass bending jigs -- jc -- Thursday, 20 December 2007, at 4:54 p.m.
      • Re: Glass bending jigs -- Sean S -- Thursday, 20 December 2007, at 5:42 p.m.
        • Re: Glass bending jigs -- JC -- Thursday, 20 December 2007, at 7:58 p.m.
        • Re: Glass bending jigs -- Dana -- Monday, 24 December 2007, at 10:37 a.m.
          • Re: Glass bending jigs -- Sean S -- Wednesday, 26 December 2007, at 12:22 p.m.
            • Re: Glass bending jigs -- sivart -- Wednesday, 26 December 2007, at 3:06 p.m.
              • Re: Glass bending jigs -- Sean S -- Wednesday, 26 December 2007, at 4:56 p.m.
              • Re: Glass bending jigs -- SVP Neon Equipment -- Wednesday, 2 January 2008, at 12:51 p.m.
      • Re: Glass bending jigs -- neontek -- Friday, 21 December 2007, at 6:40 p.m.

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.