The Neon Bender's BBS!

[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

Re: Torches for Sale

Posted By: SVP Neon Equipment
Date: Monday, 10 September 2007, at 8:35 p.m.

In Response To: Torches for Sale (Jared)


The pictures don't show in your link - not for me at least.

Can't help you with values, etc., but I will mention that a "lightly oiled" oxygen burner is not a good idea. Oxy and oil residue do not like each other very well. I would recommend cleaning all the oil off of it before lighting it or the result may not be what is expected.

Good luck selling.

Mark

> Hi!
> I attended The British School of Neon back
> in 1990. At the end of the course I
> purchased several new torches direct from
> the school. They have been in storage for
> many years, and the time has come for me to
> sell off the bench and ribbon burners.

> But first I have to figure out what a fair
> price would be... so a bit of assistance
> would be much appreciated! If you recognize
> the make/model of the bench burner, or if
> you know current values for these specific
> torches, it would be MOST appreciated if
> you'd reply with any info you have. Thanks!

> ------------------

> Bench Burner - Unknown Manufacturer -
> Premix? - Runs on Gas / Air - For Soda Lime
> or Leaded Tube Bending / ~ 40mm flame width

> ------------------

> Ribbon Burner, Tubular - Herbert Arnold
> Model 150-D - Premix - Runs on Gas / Air
> -OR- Gas / Air+Oxygen - For Soda Lime,
> Leaded, or Borosilicate Tube Bending /
> Adjustable flame length, 90mm to 500mm (max
> length = ~19.5")

> ----------------

> I am currently seeking a local neon shop
> where I can potentially bring in these
> torches to be tested. I have a small oxygen
> tank & regulator so I can potentially
> test the Arnold Ribbon burner completely.
> Both torches are used, but the bench burner
> has very few hours on it and no visible
> wear. The ribbon burner's tube had developed
> some surface rust while in storage, it has
> since been lightly sanded and oiled, and it
> has had a good port cleaning.

> Again, any info on the current value of
> these torches would be very helpful. If you
> have any info, or are interested in either
> of these torches, you can contact me by
> either replying to this thread, or emailing
> to jared_f@reallyfast.info Thanks!

> PS: Click the link below to see pics of the
> 2 torches. It appears I cannot post the
> photos here. Thanks!


Messages In This Thread

[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.

This page Copyright © 1996-2005 Krypton Neon