The Neon Bender's BBS!

The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please contact us.

[Please Read]

Re: u-gauge markings

Posted By: SVP Neon Equipment
Date: Tuesday, 17 July 2007, at 12:33 a.m.

In Response To: u-gauge markings (Glen)

> I switching to 704 silicone oil for my
> u-guage. I am looking for the markings for
> the gauge for this oil. Is there someone who
> can email me a gauge or give me the distance
> in mm between the marks. I searched the net
> for a downloadable gauge with no luck.
> Thanks for your help. Glen

Do you have a standard U-tube manometer? Or one where one side of the tube is larger diameter than the other? Each type requires a different scale.

A faxed scale may work if it's the correct one for the U-gauge you have, but I doubt the quality will be very good unless you have an exceptionally good fax machine and the sending machine is too. Also remember to set both fax machines for 100% instead of the normal 97%. Otherwise the scale will not be the correct size when you receive it (the graduations will be too close together).

If what Sean sends you doesn't work out for some reason, send me a PM with your direct email and I can email you an MS Word doc with the full size scale and you can print it out to whatever quality you want.

Mark

Messages In This Thread

• u-gauge markings -- Glen -- Monday, 16 July 2007, at 7:23 p.m.
  • Re: u-gauge markings -- Sean S -- Monday, 16 July 2007, at 7:32 p.m.
  • Re: u-gauge markings -- SVP Neon Equipment -- Tuesday, 17 July 2007, at 12:33 a.m.
    • Re: u-gauge markings -- John Anderson -- Tuesday, 17 July 2007, at 6:16 a.m.

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.