The Neon Bender's BBS!

The Archive no longer allows posting but search of hundreds of previous posts are available
If you have any questions please contact us.

[Please Read]

Re: Switching individual tubes

Posted By: Winslow
Date: Saturday, 13 January 2007, at 3:35 a.m.

In Response To: Switching individual tubes (Dana)

> I have a job where the client wants to turn
> one section off and another on (Open/Closed
> of all things.)

> I have planned the cost of two electronic
> transformers with switches to simplify and
> stay safe.

> Anyone know of a more elegant solution?

you just need to run the two 120v cords from each tran into a switch box containing a DPDT switch from there a one cord to supply voltage.
The switch will direct supply current to one trans or the other. Ive done this mounted right on the back of acylic using a shallow plastic bell box from Home depot. Just make sure you keep the ground continuious from supply to trans.

MiniLung

Messages In This Thread

• Switching individual tubes -- Dana -- Friday, 12 January 2007, at 11:24 a.m.
  • Re: Switching individual tubes -- Winslow -- Saturday, 13 January 2007, at 3:35 a.m.

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.