The Neon Bender's BBS!

Re: hyde 24" ribbon burner

Posted By: Mark@SVP
Date: Wednesday, 22 June 2005, at 5:32 p.m.

In Response To: Re: hyde 24" ribbon burner (Sean S)

> Loose the compressor and get the blower
> going and put a relief valve on there and
> your problems should be fixed.

Agreed. Low pressure (2-3 psi) and high volume is what you need, not the high pressure and low volume that you are getting from that compressor.

Keep the air line from the blower as wide and as short as possible.

Good luck!

Mark

Messages In This Thread

• hyde 24" ribbon burner -- sparky -- Wednesday, 22 June 2005, at 5:29 a.m.
  • Re: hyde 24" ribbon burner -- Sean S -- Wednesday, 22 June 2005, at 8:20 a.m.
  • Re: hyde 24" ribbon burner -- Mark@SVP -- Wednesday, 22 June 2005, at 8:22 a.m.
    • Re: hyde 24" ribbon burner -- sparky -- Wednesday, 22 June 2005, at 9:03 a.m.
      • Re: hyde 24" ribbon burner -- Sean S -- Wednesday, 22 June 2005, at 11:24 a.m.
        • Re: hyde 24" ribbon burner -- Mark@SVP -- Wednesday, 22 June 2005, at 5:32 p.m.

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.