The Neon Bender's BBS!

Re: hyde 24" ribbon burner

Posted By: sparky
Date: Wednesday, 22 June 2005, at 9:03 a.m.

In Response To: Re: hyde 24" ribbon burner (Mark@SVP)

MARK AND SEAN
THANKS FOR YOUR RESPONCE .
OVER HERE IN ENGLAND WE ONLY USE WHAT WE CALL NORTH SEA GAS I SUPPOSE THAT IS NATURAL GAS.
THE GUY WHO GOT ME THE RIBBON SAYS IT IS THE RIGHT SETUP. WE ASKED FOR GAS CONSUMPTION AS WE WHERE PUTTING THE MAIN 25 MM LINES IN. AS FAR AS MY AIR SUPPLY IS CONCEARNED I AM RUNNING OFF A LARGE COMPRESSOR WHICH SUPPLIES THE REST OF OUR FACTORY, I HAVE A REGULATOR AT THE START POINT INSIDE MY ENCLOSURE WHICH IS SET AT 1 BAR / 15 PSI . I MUST ADMIT IT MAKES A LOT MORE NOISE THAM MY OLD SETUP, WHICH WAS A 12" RIGGED UP TO A BLOWER. I AM POSOTIVE THAT EVERYTHING IS CONNECTED UP CORRECTLY AS I HAVE NO PROBLEM AT ALL WHEN USING ANYTHING UP TO 14" AT A TIME , ON EITHER SIDE OF THE CENTRE . SOMEBODY SUGGESTED PUTTING SOME WADDING IN THE THROUT OF THE BURNER , HAVE YOU HEARD OF THIS BEFORE? THANKS FOR YOU HELP CHAPS MARTIN

Messages In This Thread

• hyde 24" ribbon burner -- sparky -- Wednesday, 22 June 2005, at 5:29 a.m.
  • Re: hyde 24" ribbon burner -- Sean S -- Wednesday, 22 June 2005, at 8:20 a.m.
  • Re: hyde 24" ribbon burner -- Mark@SVP -- Wednesday, 22 June 2005, at 8:22 a.m.
    • Re: hyde 24" ribbon burner -- sparky -- Wednesday, 22 June 2005, at 9:03 a.m.
      • Re: hyde 24" ribbon burner -- Sean S -- Wednesday, 22 June 2005, at 11:24 a.m.
        • Re: hyde 24" ribbon burner -- Mark@SVP -- Wednesday, 22 June 2005, at 5:32 p.m.

Neon Bender's BBS! is maintained by Kenny with WebBBS 5.12.